STAR Appliance & Refrigerator Repair

If your dishwasher not cleaning dishes properly  Is the water supply turned on to the dishwasher? Make sure the dishwasher water supply is turned on. Were items loaded correctly in the dishwasher? Be sure that items in the dishwasher do not block the spray arms and no items are blocking the detergent dispenser when the door is closed. Items should be loaded with the soiled surface facing down and inward toward the spray arms. CLICK HERE  for more information on properly loading your dishwasher. Did you run the hot water in the sink closest to the dishwasher? By running the hot water for at least 30 seconds, the water lines going near the dishwasher will flush. Depending on where your hot water heater is located in your house, you could have cold water entering your dishwasher if you do not do this.  Was the correct amount of detergent and rinse aid used or was old detergent used? Do not use hand soap or laundry detergents. Use automatic dishwasher detergent

#LG #refrigerator repair in Charlotte NC. If your LG refrigerator not cooling there are a few simple steps to check: - Adjust temperature settings. Check to see that the unit is set to its optimal setting. 37 DEGREES is the recommended temperature for the refrigerator and 0 DEGREES for the freezer. If the thermometer measures the temperature more than 4°F warmer than the set temperature, this is a normal operation. - Ensure DEMO Mode is deactivated. - Hot food in the unit. Adding hot food to the refrigerator compartment will temporarily spread heat throughout the unit. The unit will require some time to cool down the hot food and regulate its internal temperature. - Frequently opening the door. If the unit is opened too frequently, the unit will not be able to maintain a regulated temperature. Avoid frequent and unnecessary opening of the door to enable the unit to conserve cold air circulation throughout the unit. - Space to the wall. The unit must not be too close to the wall